Jon's XS650 Part I

     Jon's had the itch to build an XS for a while now and he has got his hands on a '77. He wanted to build a lowered flat tracker on a budget, using many refurbished stock parts. A big contributor to the look he's after is the swing arm.
     I kept the design really simple for the swing arm, reusing the axle tensioners and pivot tube, I stretched it 4" from the base line. With that four inch stretch went the shock mounts resulting in a super low profile.  A few cases of beer and a couple of helping hands later he's got a great start to a custom bike. Check it out:

Instagram is wonderful.

I love this shot with the rising sun vibe to it.

1"x 2"- .125"w Tube

Keep it simple.

Flashback: Honda 1.0

     Im going back in time with this. I "finished" the Honda two years ago and haven't stopped finishing it since. Here are some pics of Honda 1.0 in an attempt to build excitement for the release of Honda 3.0 which will inevitably be nothing short of anticlimactic.For what its worth:

Mock up

Fresh motor!

Lesson learned. ^ Too small of a gear.

 .

Brake Cleaner and Welding. Just say no.

     Hobbyist or professional, if you weld, then you better know not to pre-clean your parts with brake cleaner. Basically a chemical reaction between the chemicals in brake cleaner (not only brake cleaner) and argon gas creates phosgene gas. And it'll kill ya dead. Don't take my word for it, let Baldey McSoulpatch teach your ass some science. Safety 1st: Pre-Cleaning for Welding

Better learn how to read.

High speed....Hi Death.

     I was thumbing through some old photos and came across some pics of my first "bike". Its a Kikker 5150. The 110cc five speed boosted my ass to a white knuckle speed of 53 mph! But hey, for 15 bills it was pretty cool, and street legal! Kikker has seriously expanded there product line since I've had mine, check em out: Bobber

    

Apes!

My rendition of a COOP painting.

Paul's '28 A Part II

     Paul's been making some good progress on his sedan. It's sitting channeled 4" and the motor mounts and the front suspension are well underway.

Ford 429 and Toploader trans mocked up.

Sub-frame DONE!

     He called me up to help him give the sedan a haircut. He laid out the 5.75" chop at the pillars with some masking tape and a spray can and we went at it. His weapon of choice was a saws-all with a nice new thin steel blade.  I was surprised how quickly we cut through, no rusty pillars here, I mean this thing is solid!

X-brace in the roof.

Byaaaahhhhh!!

     Paul trimmed up the bottoms of the pillars and we set the top back on. I love those moments when you step back to look at the badassness you've created, this was definitely one of those moments. The almost 6" chop is serious! Combined with a 4" channel, there's not a lot of room left!

Looks bitchin!

Paul's '28 A Part I

     I went with Paul to check out this 28' Model A we found on CL. Like all great deals it was in the middle of fucking nowhere. When we rolled up it was obvious were weren't coming home without it. Super clean, straight and on a rolling chassis. Booyah! After the typical bullshitting session, bills were exchanged and we was outta there!
     He had the body and panels media blasted and he laid down some oxide primer. Meanwhile I finished up the chassis. It was fabricated from prints from these guys: Model A Prints. They seem pretty well thought out and from the pictures on their page the design has been proven. The only thing I'd change is the fitment between the tapered rails and the square rear section. I would have liked to have seen the front rails parallel and attach to a drive shaft loop/crossmember but hey, so far so good! Check it out!                              
    

                                

It rubs the lotion on its skin...

     Okay, maybe I'm a pussy. But, when you work with your hands like I do, you're probably familiar with cracks in your hands the size of the Grand Canyon and lets be honest; it hurts like a bitch.
     Behold! I've found relief in this product: O'Keeffe's Working Hands. Yeah it works AND I didn't get payed to say that. Check it out : Working Hands  

... or else it gets the hose again.